Crestron PMK-6X-DSW Instalační příručka Strana 19
- Strana / 24
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Crestron TPS-6X-DSW Wall Mount Docking Station for TPS-6X
Problem Solving
Troubleshooting
The following table provides corrective action for possible trouble situations. If
further assistance is required, please contact a Crestron customer service
representative.
TPS-6X-DSW Troubleshooting
TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION
The touchpanel is not
properly docked.
Adjust the touchpanel to
ensure it is squarely seated
in the TPS-6X-DSW and fully
snapped into position.
The electrical contacts
are dirty.
Perform “Manual Undocking
of Touchpanel” (refer to page
13) and clean the contacts.
The Cresnet connector
is not secure.
The solenoid connector
is not secure.
Perform “Manual Undocking
of Touchpanel” (refer to page
13), then perform “Removal“
(refer to page 12) and ensure
the connectors are secure.
Device is not receiving
power from a Crestron
power source.
Use a Crestron power
source. Verify connections.
The TPS-6X-DSW
does not unlatch
the touchpanel.
IR window is dirty or
obstructed.
Verify IR window at top of
bezel is clean and
unobstructed.
The touchpanel
does not dock in
the TPS-6X-DSW.
There is mechanical
binding in the
TPS-6X-DSW.
Perform “Removal” (refer to
page 12) and check the
assembly.
The electrical contacts
of the TPS-6X-DSW are
dirty.
Perform “Manual Undocking
of Touchpanel” (refer to page
13) and clean the contacts.
The touchpanel
works in wireless
mode but not
communicate in
wired mode
docked.
Insufficient power for the
Cresnet network.
User the Crestron Power
Calculator to help determine
system requirements. Refer
to “Network Wiring” on page
7.
The electrical contacts
of the TPS-6X-DSW are
dirty.
Perform “Manual Undocking
of Touchpanel” (refer to page
13) and clean the contacts.
The Cresnet connector
is not secure.
Perform “Manual Undocking
of Touchpanel” (refer to page
13), then perform “Removal“
(refer to page 12) and ensure
the connectors are secure.
The touchpanel
does not
communicate with
Cresnet when
docked.
The Net ID in the
SIMPL™ Windows
program does not match
the Net ID of the
touchpanel.
Verify Net ID in the SIMPL
Windows program matches
the Net ID of the touchpanel.
(Continued on following page)
Operations & Installation Guide – DOC. 6708B Wall Mount Docking Station for TPS-6X: TPS-6X-DSW • 15
- Crestron TPS-6X-DSW 1
- Regulatory Compliance 2
- Contents 3
- TPS-6X: TPS-6X-DSW 5
- Specifications 6
- Physical Description 7
- (115 mm) 9
- Network Wiring 11
- Supplied Hardware 11
- Mounting Options 12
- Installation 12
- Removal 16
- Hardware Hookup 16
- Operation 17
- Problem Solving 19
- Check Network Wiring 20
- Reference Documents 21
- Further Inquiries 21
- Future Updates 22
- Return and Warranty Policies 23
Související produkty a manuály pro Dokovací stanice mobilních zařízení Crestron PMK-6X-DSW
(5 stránky)AEG L6FEG1412N manuály
Uživatelské manuály a uživatelské příručky pro ne AEG L6FEG1412N.
Poskytujeme 5 manuály pdf AEG L6FEG1412N ke stažení zdarma podle typů dokumentů: Rychlý návod, Uživatelský manuál
Komentáře k této Příručce