Crestron CNMK Specifikace stáhnout pdf (Strana 20)

Mouse/Keyboard Controller Crestron CNMK

16 • Mouse/Keyboard Controller: CNMK Operations Guide - DOC. 5699A

2. As shown after this step, select File Transfer | Send Program

(alternatively, press Alt+P) from the Viewport menu.

File Transfer | Send Program Command

3. The “Send Program” window appears, as shown after this step. Click

Browse, locate the compiled file (.spz for PRO2), and click Open. This

will display the program's header information and enable one or both of

the What to Send check boxes. If the program does not contain any

SIMPL+ modules, only the SIMPL Program check box will be enabled.

If it does contain SIMPL+ modules, then the SIMPL+ Program(s)

check box will also be enabled. Select one or both check boxes and

then click Send Program to begin the transfer.

NOTE: Refer to the respective Operations Guide for the control system for details

about the other fields shown on the “Send Program” window.

“Send Program” Window

4. To verify that the program has been transferred successfully, select

Diagnostics | Report Program Information. This should display a

window that provides details about the current program loaded into the

control system.

Firmware Upgrade

A firmware upgrade file has the

extension .upg

To take advantage of all the available features, it is important that the unit contains

the latest firmware. Please check the Crestron website for the latest version of

firmware. Not every product has a firmware upgrade, but as Crestron improves

functions, adds new features, and extends the capabilities of its products, firmware

upgrades are posted. To upgrade the CNMK firmware, complete the following steps.

1. Make sure that “Communication Settings” that begins on page 13 has

been performed. Suggested baud rate is 38400.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Žádné komentáře

Crestron CNMK Specifikace Strana 20