Crestron CNRACKX-DP Specifikace stáhnout pdf (Strana 11)

Crestron CNXENET+ CNX Enhanced Ethernet Expansion Card

5. As shown below, carefully align the pins on the 26-pin DPA connector

of the CNXENET+

with the DPA connector of the CNXCPU.

CNXCPU Installation (2 of 3) – Install CNXENET+

26-PIN DPA

CONNECTOR

MOUNTING

BRACKETS

NOTE: The DPA pins are more easily inserted by gently “rocking” the

CNXENET+ side-to-side while pressing onto DPA connector.

6. DO NOT force pins into connector and press CNXENET+ until pins

are fully seated. Make sure that the mounting brackets on CNXENET+

align with mounting holes of the CNXCPU. Make sure that the

LAN/DPA connector aligns with cut out.

7. Refer to the diagram on the next page. From the CNXCPU faceplate,

reinstall the two

mounting screws to secure CNXENET+. Tighten

the screws to finger-tight

then, using a #1 Phillips tip screwdriver

tighten the screws an additional 1/8-turn.

Operations & Installation Guide – DOC. 8153A CNX Enhanced Ethernet Expansion Card: CNXENET+ • 7

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Žádné komentáře

Crestron CNRACKX-DP Specifikace Strana 11