Crestron DM-RMC-200-C Instalační příručka stáhnout pdf (Strana 24)

DigitalMedia 8G+™ Receiver 200 Crestron DM-RMC-200-C

Supplied Hardware

The hardware supplied with the DM-RMC-200-C is listed in the following table.

Supplied Hardware for the DM-RMC-200-C

DESCRIPTION PART NUMBER QUANTITY

Mounting Bracket 2029286 1

Screws, 6-32 x 1”, Pan, Phil 2007250 6

Screws, 6-32 x 3/4”, Slot 2009211 4

Tie Wraps 2013608 2

Installation

Ventilation

The DM-RMC-200-C should be used in a well-ventilated area. The venting holes

should not be obstructed under any circumstances.

To prevent overheating, do not operate this product in an area that exceeds the

environmental temperature range listed in the table of specifications.

Mounting the DM-RMC-200-C

The DM-RMC-200-C mounts to a 2-gang electrical box (not included). To mount

the DM-RMC-200-C, perform the following steps (refer to the illustration on the

following page):

1. Using the four included 6-32 x 3/4” slot head screws (2009211), attach the

included mounting bracket to the electrical box.

2. Ground the DM-RMC-200-C and attach the proper cables to the rear of the

unit (refer to “Hardware Hookup” on page 21 for information).

3. Using four of the included 6-32 x 1” Phillips head screws (2007250), attach

the DM-RMC-200-C to the mounting bracket.

CAUTION: Excess wire that is pinched between the DM-RMC-200-C and the

electrical box can short out. Ensure that all excess wire is completely inside the

electrical box and is not between the box and the DM-RMC-200-C.

18 • DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C Operations & Installation Guide – DOC. 7126B

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Žádné komentáře

Crestron DM-RMC-200-C Instalační příručka Strana 24