Crestron iMedia IM-RXV1 Instalační příručka stáhnout pdf (Strana 13)

Crestron IM-RXV1 & IM-RXV3 iMedia Receiver/Processor with Video

Connectors, Controls, & Indicators (Continued)

# CONNECTORS,

CONTROLS, &

INDICATORS

DESCRIPTION

13 RGBHV

(1) DB15HD, female, RGB output. Displays

RGB signal from RGB source connected to

IM transmitter.

PIN FUNCTION PIN FUNCTION

1 Red Video 9 No Connect

2 Green

Video

10 Ground

3 Blue Video 11 No Connect

4 Reserved 12 Monitor Sense 1

5 Ground 13 Horizontal Sync

6 Red

Ground

14 Vertical Sync

7 Green

Ground

8 Blue

Ground

15 Monitor Sense 2

IM INPUT & PEAKING

CONTROL

This eight-pin RJ-45 transport port (three on

IM-RXV3) is the input connection of the

iMedia cable. It carries audio and video

signals over CresCAT-IM cable from an

iMedia transmitter (such as the IM-FTCC-B,

IM-TCC, or IM-WCC).

The peaking control is used during setup for

video cable length compensation. Refer to

“iMedia Wizard Configuration” on page 15 for

additional details.

15 AUDIO OUT

This 5-pin detachable terminal block audio

output connector provides

balanced/unbalanced line-level left and right

audio for application to an external amplifier.

16 SPEAKER OUT

The left and right speaker connectors (two

2-pin detachable terminal block connectors,

5 mm spacing) provide 20 Watts of amplified

audio (10 Watts per channel) into 8 Ω

speakers.

Operations & Installation Guide – DOC. 6478 iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3 • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Komentáře k této Příručce

Žádné komentáře

Crestron iMedia IM-RXV1 Instalační příručka Strana 13

Komentáře k této Příručce

Související produkty a manuály pro Přijímač Crestron iMedia IM-RXV1