Crestron TPMC-9L Instalační příručka stáhnout pdf (Strana 32)

9” Wall Mount Touch Screen Crestron TPMC-9L

NOTE: There is also a rack mount kit (RMK-9L) available for the TPMC-9L. Refer

to the RMK-9L Installation Guide (Doc. 7035).

If the BB-9L or PMK-9L are to be used and a touch screen is not available, the

installer can either leave the hole in the mounting surface open (if permitted by local

building codes) or attach the cover plate supplied with the mounting kit.

Touch Screen Mounting

Physical installation of the TPMC-9L without a mounting option includes mounting

the unit to the wall and installing a faceplate. The only tools required for the

procedures presented here are masking tape (or equivalent), a level, a gypsum board

saw (or equivalent), and a #2 Phillips tip screwdriver. The following procedures are

based on the use of the supplied screws and clips for post-construction installation.

Mounting in a Wall

The TPMC-9L is designed to be mounted in a wall or lectern. Two overlay cutout

templates (4511860) are supplied. One is in the shape of the required opening; the

other is similar to a frame, with the inner area of the frame the shape of the required

opening. (Refer to the illustrations on page 29.) Use the template that is most

convenient.

Mounting Parts Supplied with the TPMC-9L

PART DESCRIPTION PART NUMBER QUANTITY

Metal Mounting Clip 2014237 4

Overlay Template Cutout 4511860 1

Connector Plug, 2-pin 2003574 1

Connector Plug, 3-pin 2003575 1

Connector Plug, 4-pin 2003576 1

Screw, #6-AB x 2-1/2”, Pan Head 2014276 4

Screw, #04-40 x 2”, Pan Head* 2018793 4

* The #04-40 x 2” screws are for use with TPMC-9L mounting kits such as the BB-9L (sold separately).

NOTE: The following drawings are not to scale. Do not attempt to use them to

prepare the hole in the mounting surface.

28 • 9” Wall Mount Touch Screen: TPMC-9L Operations & Installation Guide – DOC. 7030F

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Žádné komentáře

Crestron TPMC-9L Instalační příručka Strana 32