Crestron CHV-TSTATEX Instalační příručka stáhnout pdf (Strana 5)

Crestron CHV-TSTAT and CHV-THSTAT Thermostats

Operations and Installation Guide – DOC. 8163E Contents

•

iii

Quick Installation Reference

1. Select a suitable location and run the connecting wires from the heating/cooling system and the Cresnet

system. Refer to pages 7 and 8 for descriptions of the thermostat connectors.

Refer to page 9 for Network wiring details.

Use the appropriate wiring diagram:

• Separately Powered Two Wire Heat Systems

(Powered by an Independent Transformer) (Refer to page 12)

• 1-Stage Heat Only (Refer to page 12)

• 1-Stage Heat with Fan Control (Refer to page 13)

• 1-Stage Cool Only (Refer to page 13)

• 1-Stage Heat/Cool with Integrated Control Unit (Refer to page 14)

• 1-Stage Heat/Cool with Separate Systems (Refer to page 15)

• 1-Stage Heat Pump (Refer to page 16)

• 2-Stage Heat Pump (Refer to page 17)

• Slab 1, Slab 2, and Slab 3 (Floor Warming and/or Space Heating) (Refer to page 18)

• Slab 4A 2-Stage Heat/1-Stage Cool Systems and Slab 5A Floor Warming with 1-Stage Space

Heat/Cool (Refer to page 19)

• Slab 4B 2-Stage Heat/1-Stage Cool System and Slab 5B 1-Stage Heat/Cool with Floor Warming

(Refer to page 20)

• General Humidifier Connections (Refer to page 21)

2. Separate the thermostat from the backplate to expose the connections and mounting holes.

3. Mount the thermostat backplate (60 inches (~1.6 meters)) above the finished floor) directly to the wall with wall

anchors (not provided) and screws (not provided) or to a horizontally mounted 1-gang electrical box (not

provided), and connect the wiring. Refer to page 22 for detailed mounting instructions and pages 7 and 8 for

detailed connector information. If using a 5-sided box, fill with insulation material to minimize wall air ingress.

4. Install the thermostat on the backplate (refer to page 22).

5. Set up the thermostat (refer to page 24).

• For Heat/Cool Radiant and Forced Air Systems, refer to page 27.

• For Heat Pump Systems, refer to page 31

• For Slab Systems, refer to page 35.

6. Configure the thermostat (refer to “Thermostat Operation” which starts on page 63).

1 2 3 4 5 6 7 8 9 10 ... 91 92

Žádné komentáře

Crestron CHV-TSTATEX Instalační příručka Strana 5