Crestron CHV-TSTATEX Instalační příručka Strana 77

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 92
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 76
Crestron CHV-TSTAT and CHV-THSTAT Thermostats
Operations and Installation Guide DOC. 8163E Thermostats: CHV-TSTAT and CHV-THSTAT
71
HumidifierScreen
MODE
VIEW
Humidifier
ENABLED DISABLED
Pressing the MODE button again displays the “Humidifier”
screen.
NOTE: This page only appears if enabled in the “HUM
OPTS” setup screen.
NOTE: CHV-TSTAT requires additional remote humidity
sensor (CHV-RTHS, sold separately).
Use the up ▲and down ▼arrow buttons to select
ENABLED or DISABLED.
Crestron SystemScreen
MODE
VIEW
Crestron Sys
ONLINE HOLD
Pressing the MODE button again displays the “Crestron
Sys” (Crestron System) screen.
Use the up ▲and down ▼arrow buttons to select ONLINE
or HOLD.
ONLINE: Data flows both ways, to and from the
thermostat, enabling adjustment from a remote location.
HOLD: Data flows one way, from the thermostat, blocking
system commands to change the temperature and humidity
when the current settings should not be reset. Restores to
the last command sent when online is re-engaged.
Global UpdateScreen
MODE
VIEW
Global Update
SEND
Pressing the MODE button again displays the “Global
Update” screen.
Allows a single thermostat location to update the current
temperature settings to all other thermostats on the system,
provided that this function has been defined in the Crestron
program.
Press the down▼ button to send the update.
Pressing the MODE button again displays the main screen.
Zobrazit stránku 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 91 92

Komentáře k této Příručce

Žádné komentáře