Crestron CT-1550 Specifikace stáhnout pdf (Strana 20)

Wired 5.7 Inch Tabletop Touchpanel Crestron CT-1550

• Wired 5.7 Inch Tabletop Touchpanel: CT-1550 Operations Guide – DOC. 6116A

Uploading and Upgrading

NOTE: Crestron recommends that you use the latest software and that each device

contains the latest firmware to take advantage of the most recently released features.

Please check the Crestron website (http://www.crestron.com/updates

) for the latest

versions of software and firmware. New users are required to register to obtain

access to this site.

Assuming a PC is properly connected to the entire system, Crestron programming

software allows the programmer to upload programs and projects to the system and

touchpanel after their development. However, there are times when the files for the

program and projects are compiled and not uploaded. Instead, compiled files may be

distributed from programmers to installers, from Crestron to dealers, etc. Even

firmware upgrades are available from the Crestron website as new features are

developed after product releases. In those instances, one has the option to upload via

the programming software or to upload and upgrade via the Crestron Viewport.

NOTE: The Crestron Viewport utility performs multiple system tasks, primarily via

an RS-232 or TCP/IP connection between the control system and a PC. It is used to

observe system processes, upload new operating systems and firmware, change

system and network parameters, and communicate with network device consoles and

touchpanels, among many other tasks. Viewport can also function as a terminal

emulator for generic file transfer. All of these functions are accessed through the

commands and options in the Viewport menus. Therefore, for its effectiveness as a

support and diagnostic tool, the Crestron Viewport may be preferred over

development tools when uploading programs and projects.

The following sections define how one would upload a SIMPL Windows program,

VT Pro-e project or upgrade the firmware of the CT-1550 touchpanel. However,

before attempting to upload or upgrade, it is necessary to establish communications.

Communication Settings

NOTE: For laptops and other PCs without a built-in RS-232 port, Crestron

recommends the use of PCMCIA cards, rather than USB-to-serial adapters. If a

USB-to-serial adapter must be used, Crestron has tested the following devices with

good results:

Belkin (large model) F5U103

I/O Gear GUC232A (discontinued)

Keyspan USA-19QW (discontinued)

Other models, even from the same manufacturer, may not yield the same results.

Connection to the CT-1550 touchpanel is via a 6-pin RJ-11 connector in the base of

the unit. Therefore, uploading or upgrading must be accomplished through a control

system. The procedure in this section provides details for RS-232 communication

between the PC and the control system. If TCP/IP communication is preferred,

consult the latest version of the Crestron e-Control Reference Guide (Doc. 6052) or

the respective Operations Guide for the control system. These documents are

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Komentáře k této Příručce

Žádné komentáře

Crestron CT-1550 Specifikace Strana 20

Komentáře k této Příručce

Související produkty a manuály pro ne Crestron CT-1550